Britannia Kitchen VentilationHome PageLinks
About UsOur ProjectsContact UsBrochureProduct SelctionDownloadscpd Seminars

 

10 Highdown Road, Sydenham Industrial Estate
Leamington Spa, Warwickshire,
CV31 1XT
Phone: 08450 760 390
Fax: 08450 760 391

Providing a refreshing approach to kitchen ventilation
Welcome to Britannia Kitchen-Ventilation




Refresh Recirculation
Refresh Recirculation

  • Ideal for use where ductwork cannot be installed

  • Filtered clean air recirculated back into the kitchen

  • Freestanding unit quickly installed into building

  • No structural alterations required

  • Available in seven size options

  • Handles up to 1.2 m3/s

  • Integral services tower with fan and filters

  • Optional controls package

Principal of Operation

Contaminated air from the cooking application is drawn through Superstream high efficiency baffle type grease filter panels located within the main canopy unit. The air is then drawn through the extract plenum into the top of the integral services tower.

The extracted air is then passed through five stages of additional filtration in the services tower to remove grease, smoke and odour.
This cleaned air is then reintroduced into the canopy via an integral supply air plenum which distributes the air through the front face diffusers and personal spot coolers back into the kitchen.


Standard Features

Services tower is fully insulated to minimise noise breakout.
Canopy system is fitted with recessed fluorescent lighting.
Each unit is pre-wired internally and supplied with approx 3 metre long connection lead, fitted with standard BS 3 Phase connection plug.


IMPORTANT NOTES:


Due to requirements of Gas Regulations, Refresh Units can only be used over electrically powered cooking equipment.
Refresh does not include equipment to reduce the extracted air temperature, therefore consideration should be given to provide cooling within the kitchen.

Optional Intelligent Controls Package

The standard system is supplied with an on/off switch with speed control potentiometer.

You can provide greater control of your Refresh Unit, by selecting the optional intelligent controls package.

The controls package is designed to achieve intelligent control of the fan unit without any external influence, this is achieved through linked pressure switches within the services tower which regulate the speed of the fan unit.

As system pressure increases through filter absorbency, the fan unit speeds up to maintain balanced extract.

Visible and audible warnings are provided to indicate when integral filters require maintenance or replacement.

Should the system resistance increase to a point beyond which the fan can achieve, an automatic cut out will function to prevent any damage to the fan unit.

A full selection of spare filter elements and accessories available from Britannia, to keep your refresh unit, running for many years.


Optional Rear Panelling

The standard Refresh unit has the services tower at one end, and a support wall at the other end to make the unit freestanding.

The area to the rear of the cooking equipment is left open.

You can however take advantage of the rear panelling option.

The rear panelling runs from floor level, up to the underside of the canopy, and the full length of the cookline between the services tower, and the end wall. If you select this option, it comes complete with an integral services distribution raceway to house the electrical services to the cooking equipment, (installed by others)

Click here
to download the Refresh brochure.
 


Britannia also offer a wide range of modular canopies to suit those standard installations as well as our traditional bespoke canopy manufacturing service. We also provide accessories for kitchen ventilation systems, such as grease filter panels and light fittings.

Our technical support services include free design advice, as well as CIBSE approved CPD Technical Seminars on the subject of kitchen ventilation design.

If you need help or advice on any aspect of our products please call our sales team on 01926 811300


Lincat group plc